Average Reviews:
(More customer reviews)This bit doesn't have the curves of the -6460. Instead, it slopes in a straight line all the way down to the edge of the bit. (Similar to the Freud # 99-515 Quadra-Cut Bevel Raised Panel Bits, 3-1/2'' Dia. x 5/8'' H x 1/2'' Sh., but a different size)
Like the -6460 and -6455, the bit has two main and two secondary cutting edges. The main ones extend from the center out to the edge and are the ones facing you in the picture. The secondary cutting edges are at the top and bottom in the picture and only extend in a 1/2" or so from the outer edge.
It goes without saying (but I will anyway :)) that a bit this large MUST be used in a router table and run at a slower speed. At 10K rpm, the edge speed is approaching 6900 feet per minute...that's almost 80 miles per hour.
Click Here to see more reviews about: Milwaukee 48-23-6450 1-1/4" x 2-5/8" x 1/2" Shank Raised Panel Router Bit
Milwaukee router bits feature custom blended micro-grain carbide with titanium to hold a sharp edge longer, resulting in an extended life of the bit. The multi-axis ground relief angle on the entire cutting edge of the bit provides a flawless finish and reduces burning. Milwaukee router bit bodies are computer balanced which eliminates vibration and chatter resulting in clean, smooth profiles.
Get 35% OFF
0 comments:
Post a Comment