Average Reviews:
(More customer reviews)I've taught myself time and again not to buy cheap tools. But I could not resist the bargain of this complete set, especially after reading the glowing praise of others. For my first use of the set I needed a 3/8" round nose bit. It had a nice large nick in the blade. Then I took a look at the other round nose bits and every single one of them has nicks in the blades. Not nicks that you can barely see but large nicks that can easily be spotted. If you are doing a lot of non critical work and have a limited budget, then these bits may be ok. But if you take pride in your work and expect perfection in the results...then you might be better off getting professional grade bits. I ended up making a trip to the local Wood Craft store and getting the actual bits I needed. The cost is about 15x per bit and that is hard to swallow but the results I achieved with the quality bits are worth the extra cost to me. Maybe I will give this bit set to a beginning wood worker.
Click Here to see more reviews about: Neiko 80-Piece Premium-Grade 1/2 Inch Tungsten Carbide Router Bit Set - 3 and 2 Blade - Aluminum Case
Includes the following bits: Ten three-blade router bits: straight: 1/2, 5/8, 3/4 and 1"; flush trim: 1/2, 1/2 x 1"; slot cutter: 1/4, 3/8, 5/16 and 1/2". 70 two-blade bits: 25 degree trimming: 1/2"; 30 degree trimming: 1/2"; flush trim: 3/8", 3/8" x 1"; Corner round: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4" and 1"; cove: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2"; beading: 1/4, 3/8, 5/8, 3/4 and 1"; Roman ogee: 5/16, 1/2; Classical cove: 1/2"; Classical: 3/8 and 1/2" ; Ogee flute: R3/16"; Double Roman: 1/4 and 5/8"; wave edge: 5/16"; 60 degree horse-nose: 5/8; Rabbeting: 3/8"; 45 degree chamfer: 1/2"; 30 degree chamfer: 5/8"; 22.5 degree chamfer: 3/4"; 15 degree chamfer: 7/8"; cove box: 1/4, 3/8, 1/2 and 5/8"; V-grooving: 1/4, 3/8, 1/2 and 5/8"; round nose: 1/4, 1/8 and 1/2"; dovetail: 1/4, 3/8, 1/2, 5/8 and 3/4"; panel pilot: 3/8"; keyhole: 3/8"; cleaning-bottom: 3/4"; 60 degree V-grooving: 5/8"; straight: 3/16, 1/4, 5/32, 5/16, 3/8 and 7/16"; bottom : 1/2, 5/8 and 3/4"; Classical plunge: 3/4"; bowl tray: 1"
Get 49% OFF
0 comments:
Post a Comment